ROTY ET FILS Constructeur Français
MOTORISED MEASURING STOP – VISUMATIC
The VISUMATIC can be used to automate sawing, drilling and punching stations.
In set-up mode, the operator places the profile in the gripper and starts the cycle automatically. This means productivity gains for your business.
The VISUMATIC motorised length measuring stop is available in two versions: standard and heavy-duty.
Standard strokes range from 2000 to 8000 mm for the 2 VISUMATIC versions. We can adjust this length on request.
The standard VISUMATIC version supports a load of 40kg/m, while the HEAVY VISUMATIC version supports a load of 150kg/m.
TECHNICAL DATA SHEET for DIGITALLY CONTROLLED LENGTH STOP – PUSHER VISUMATIC
PDF Download
VISUMATIC MOTORIZED STOP WITH DIGITAL RULER CHARACTERISTICS
- Right or left-hand mounting
- Carriage guided by precision rollers on 63 HRC hardened and ground guides.
- Driven by brushless servo motor and backlash-free precision rack and pinion
- Closed-loop control
- Usable roller width: 200 or 400 mm Other widths on request
- Other widths on request
- Protective plates between rollers
- Extruded aluminium frame
- Standard strokes: 2000 to 8000 mm Other lengths on request
- Travel speed: 400 mm/s
- Resolution: 0.01 mm
- Accuracy: ± 0.1 + 0.05 mm per metre
- Manual retraction (stop)
- Height of feet adjustable from 810 to 1050 mm Other adjustment values on request
- Cable emergency stop
Nota: This device requires a screened enclosure at the rear of the machine.
VISUMATIC NUMERICAL COMMAND caracterisctics
- 5.7″ colour touch screen
- 100 Programs of 96 lines
- Absolute or relative dimensions in the same program
- Modifiable parameters: origin – speed – ramps – tool thickness – etc
- Menus accessible via tabs that are always visible
- Built-in mini-automate available to the customer
FITTING MODE
- Pneumatic clamp, 200 or 400 mm opening: can be synchronised with drilling centre, saw, punching machine, etc.
VISUMATIC OPTIONAL EQUIPMENT
- 8″ touch screen
- Barcode scanner + software
- Ethernet kit for Excel file transfer
- Input via barcode reader
- Front foot for independent mounting
- WIFI REMOTE CONTROL: remote maintenance